EN 10152, Electrolytically zinc coated cold rolled steel flat products for cold forming - Technical delivery conditions

We supply the following types of steel:

Steels for cold forming:

• DC01+ZE: Drawing quality (material number 1.0330)
• DC03+ZE: Drawing quality (material number 1.0347)
• DC04+ZE: Special deep drawing quality (material number 1.0338)
• DC05+ZE: Special deep drawing quality (material number 1.0312)
  
  

with chemical composition and mechanical properties in accordance with the requirements of EN10152.

The available coating masses, designs and surface types

• Coating mass: ZE25/25, ZE50/50, ZE75/75, ZE100/10
  
  

Surface type: surface A, surface B

Surface treatment (surface protection)

• P phosphated
• PC phosphated and chemically treated
• C chemically passivated
• PCO phosphated, chemically treated and oiled
• CO chemically passivated and oiled
• PO phosphated and oiled
• O oiled
• S sealed
• U without surface treatment
  
  

Available dimensions:

• Thickness: 0.40 to 4.0 mm
• Width: 900-1500 mm with tolerances according to EN10143 or by special agreement
• Slit strip from 10 mm
• Sheets 1000 - 1500 x 2000 - 6000 mm.
  
  

Coil or package weights: 1 - 10 mt by agreement

EN10169, Continuously organic coated (coil coated) steel flat products - Part 1 - 3:

We supply the following types of steel:

Soft steels for cold forming:

• DX51D: Machine folded grade (material number 1.0226)
• DX52D: Drawing quality (material number 1.0350)
• DX53D: Deep drawing quality (material number 1.0355)
  
  

Steels for use in the building industry:

• S220GD (material number 1.0241)
• S250GD (material number 1.0242)
• S280GD (material number 1.0244)
• S320GD (material number 1.0250)
• S350GD (material number 1.0529)
  
  

with chemical composition and mechanical properties in accordance with the requirements of EN10346.

The available coating masses:

• Sheet metal with zinc coating
  
  
  • Coating mass: Z100, Z140, Z200, Z225, Z275.
    
    

• Sheet metal with zinc-aluminium coating:
  
  
  • Coating mass: ZA095, ZA130, ZA185, ZA200, ZA255ZF100, ZF120
    
    

• Sheet metal with aluminium-zinc coating:
  
  
  • Coating mass: AZ100, AZ150, AZ185
    
    

• Electrolytically zinc coated sheet steel:
  
  
  • Coating mass: ZE25/25, ZE50/50, ZE75/75, ZE100/100
    
    

Organic coatings and conventional layer thickness ranges in microns:

Liquid finishes

• Acrylate AY (5 to 25)
• Epoxy EP (3 to 20)
• Polyester SP (5 to 30)
• Polyamide-modified polyester SP-PA (15 to 50)
• High durability polyester HDP (25 to 60)
• Polyamide-modified high durability polyester HDP-PA (15 to 50)
• Polyurethane PUR (10 to 60)
• Polyamide modified polyurethane PUR-PA (10 to 50)
• Polyvinylidene fluoride PFDV (20 to 60)
• Polyvinyl chloride plastisol PVC (P) (40 to 200)
  
  

Powder finishes

• Polyester SP (PO) (30 to 100)
  
  

Foils

• Polyvinyl chloride PVC (F) (50 to 800)
• Polyvinyl fluoride PVF (F) (38)
• Polyethylene PE (F) (50 to 300)
• Polyethylene terephthalate PET (F) (15 to 150)
• Polypropylene PP (F) (30 to 200)
  
  

Available dimensions:

• Thickness: 0.15 - 3.0 mm
• Width: 900-1500 mm with tolerances according to EN10143 or by special agreement
• Slit strip from 10 mm
• Sheets 1000 - 1500 x 2000 - 6000 x mm.
  
  

Coil or package weights: 1 - 10 mt by agreement.

The coil coated steel sheets we deliver meet the strictest requirements of our customers and are factory-tested in accordance with the provisions of

• EN 13523, Coil coated metals - Test methods - Part 0 to 23.
  
  

EN 10346, Continuously hot-dip coated steel strip and sheet products - Technical delivery conditions:

We supply the following types of steel:

Soft steels for cold forming:

• DX51D: Machine folded grade (material number 1.0226)
• DX52D: Drawing quality (material number 1.0350)
• DX53D: Deep drawing quality (material number 1.0355)
• DX54D: Special deep drawing quality (material number 1.0306)
  
  

Steels for use in the building industry:

• S220GD (material number 1.0241)
• S250GD (material number 1.0242)
• S280GD (material number 1.0244)
• S320GD (material number 1.0250)
• S350GD (material number 1.0529)
• S550GD (material number 1.0531)
  
  

with chemical composition and mechanical properties in accordance with the requirements of EN10346.

The available coating masses, designs and surface types:

• Sheet metal with zinc coating
  
  
  • Coating mass: Z100, Z140, Z200, Z225, Z275.
  • Versions: Conventional Flower (N), small flower (M)
  • Surface type: Conventional surface (A), improved surface (B), best surface (C)
    
    

• Sheet metal with zinc-iron coating:
  
  
  • Coating mass: ZF100, ZF120
  • Versions: Conventional flower (N)
  • Surface type: Conventional surface (A), improved surface (B), best surface (C)
    
    

• Sheet metal with zinc-aluminium coating:
  
  
  • Coating mass: ZA095, ZA130, ZA185, ZA200, ZA255ZF100, ZF120
  • Versions: Conventional flower (N)
  • Surface type: Conventional surface (A), improved surface (B), best surface (C)
    
    

• Sheet metal with aluminium-zinc coating:
  
  
  • Coating mass: AZ100, AZ150, AZ185
  • Versions: Conventional flower (N)
  • Surface type: Conventional surface (A), improved surface (B), best surface (C)
    
    

• Sheet metal with aluminium-silicon coating:
• Coating mass: AS060, AS080
• Versions: Conventional flower (N)
• Surface type: Conventional surface (A), improved surface (B), best surface (C)
  
  

Surface treatment (surface protection):

• chemically passivated: C;
• oiled: O;
• chemically passivated and oiled: CO;
• phosphated: P;
• phosphated and oiled: PO;
• sealed: S.
  
  

Available dimensions:

• Thickness: 0.15 - 5.0 mm
• Width: 900-1500 mm with tolerances according to EN10143 or by special agreement
• Slit strip from 10 mm
• Sheets 1000 - 1500 x 2000 - 6000 mm.
  
  

Coil or package weights: 1 - 10 mt by agreement.